{"id":9809,"date":"2026-10-23T19:34:33","date_gmt":"2026-10-23T18:34:33","guid":{"rendered":"https:\/\/www.connova.com\/knowledge\/cfk-bauteil-machbarkeit\/"},"modified":"2026-11-06T10:49:39","modified_gmt":"2026-11-06T10:49:39","slug":"cfrp-part-feasibility","status":"publish","type":"page","link":"https:\/\/www.connova.com\/en\/knowledge\/cfrp-part-feasibility\/","title":{"rendered":"Is my part feasible in CFRP?"},"content":{"rendered":"\t\t<div data-elementor-type=\"wp-page\" data-elementor-id=\"9809\" class=\"elementor elementor-9809 elementor-9505\" data-elementor-post-type=\"page\">\n\t\t\t\t<div class=\"elementor-element elementor-element-07e7bb1 e-flex e-con-boxed e-con e-parent\" data-id=\"07e7bb1\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t<div class=\"elementor-element elementor-element-666c147 e-con-full e-flex e-con e-child\" data-id=\"666c147\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-ee7940b elementor-widget elementor-widget-heading\" data-id=\"ee7940b\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<span class=\"elementor-heading-title elementor-size-default\">KNOWLEDGE \u00b7 FEASIBILITY<\/span>\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-ccbf002 elementor-widget elementor-widget-heading\" data-id=\"ccbf002\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<h1 class=\"elementor-heading-title elementor-size-default\">Is my part feasible in CFRP \/ composites?<\/h1>\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-77acea0 elementor-widget elementor-widget-text-editor\" data-id=\"77acea0\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p><strong>In short: three things decide it \u2013 the dimensions, the wall thickness and the complexity of the surfaces. If your part fits as a single component into 1.5 \u00d7 4 m, the wall thickness is between 0.3 and 25 mm and the geometry works without integrally moulded ribs, most of the question is answered.<\/strong><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-c69bfbd e-con-full e-flex e-con e-child\" data-id=\"c69bfbd\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-55a10e5 elementor-align-center elementor-mobile-align-center elementor-widget__width-initial elementor-widget elementor-widget-button\" data-id=\"55a10e5\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"button.default\">\n\t\t\t\t\t\t\t\t\t\t<a class=\"elementor-button elementor-button-link elementor-size-sm\" href=\"#beratung\">\n\t\t\t\t\t\t<span class=\"elementor-button-content-wrapper\">\n\t\t\t\t\t\t<span class=\"elementor-button-icon\">\n\t\t\t\t<svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" xmlns:xlink=\"http:\/\/www.w3.org\/1999\/xlink\" width=\"20\" height=\"20\" viewBox=\"0 0 20 20\" fill=\"none\"><rect width=\"20\" height=\"20\" fill=\"url(#pattern0_1194_5)\"><\/rect><defs><pattern id=\"pattern0_1194_5\" patternContentUnits=\"objectBoundingBox\" width=\"1\" height=\"1\"><use xlink:href=\"#image0_1194_5\" transform=\"scale(0.05)\"><\/use><\/pattern><image id=\"image0_1194_5\" width=\"20\" height=\"20\" preserveAspectRatio=\"none\" xlink:href=\"data:image\/png;base64,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\"><\/image><\/defs><\/svg>\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"elementor-button-text\">Have your 3D model checked<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-7ccec87 elementor-align-center elementor-mobile-align-center elementor-widget__width-initial elementor-widget elementor-widget-button\" data-id=\"7ccec87\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"button.default\">\n\t\t\t\t\t\t\t\t\t\t<a class=\"elementor-button elementor-button-link elementor-size-sm\" href=\"\/en\/contact-us\/\">\n\t\t\t\t\t\t<span class=\"elementor-button-content-wrapper\">\n\t\t\t\t\t\t<span class=\"elementor-button-icon\">\n\t\t\t\t<svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" xmlns:xlink=\"http:\/\/www.w3.org\/1999\/xlink\" width=\"20\" height=\"20\" viewBox=\"0 0 20 20\" fill=\"none\"><rect width=\"20\" height=\"20\" fill=\"url(#pattern0_1194_5)\"><\/rect><defs><pattern id=\"pattern0_1194_5\" patternContentUnits=\"objectBoundingBox\" width=\"1\" height=\"1\"><use xlink:href=\"#image0_1194_5\" transform=\"scale(0.05)\"><\/use><\/pattern><image id=\"image0_1194_5\" width=\"20\" height=\"20\" preserveAspectRatio=\"none\" xlink:href=\"data:image\/png;base64,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\"><\/image><\/defs><\/svg>\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"elementor-button-text\">Contact<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-f4d415d elementor-widget elementor-widget-text-editor\" data-id=\"f4d415d\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\tUpdated 6 November 2026 \u00b7 Technical content: Sebastian Preiss and Taylan Toprak, Connova\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-cb48095 e-flex e-con-boxed e-con e-parent\" data-id=\"cb48095\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t\t\t<div class=\"elementor-element elementor-element-76d15bf elementor-widget elementor-widget-shortcode\" data-id=\"76d15bf\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"shortcode.default\">\n\t\t\t\t\t\t\t<div class=\"elementor-shortcode\"><nav aria-label=\"breadcrumbs\" class=\"rank-math-breadcrumb\"><p><span class=\"last\">Home<\/span><\/p><\/nav><\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-2f24374 e-flex e-con-boxed e-con e-parent\" data-id=\"2f24374\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t<div class=\"elementor-element elementor-element-b7ee845 e-grid e-con-full e-con e-child\" data-id=\"b7ee845\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-71128b3 e-con-full e-flex e-con e-child\" data-id=\"71128b3\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t<div class=\"elementor-element elementor-element-d3c8229 e-con-full e-flex e-con e-child\" data-id=\"d3c8229\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-e824fb6 e-con-full e-flex e-con e-child\" data-id=\"e824fb6\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-dbb6ca2 elementor-widget elementor-widget-heading\" data-id=\"dbb6ca2\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">1.5 \u00d7 4 m<\/div>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-48eebc5 e-con-full e-flex e-con e-child\" data-id=\"48eebc5\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-590df10 elementor-widget elementor-widget-text-editor\" data-id=\"590df10\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>largest single component \u2013 the limit comes from the autoclave<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-421908b e-con-full e-flex e-con e-child\" data-id=\"421908b\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t<div class=\"elementor-element elementor-element-e2eb59a e-con-full e-flex e-con e-child\" data-id=\"e2eb59a\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-ff9038f e-con-full e-flex e-con e-child\" data-id=\"ff9038f\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-4a48d7d elementor-widget elementor-widget-heading\" data-id=\"4a48d7d\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">0.3\u201325 mm<\/div>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-c7405a1 e-con-full e-flex e-con e-child\" data-id=\"c7405a1\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-6c87f2d elementor-widget elementor-widget-text-editor\" data-id=\"6c87f2d\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>range of wall thicknesses produced, almost independent of material<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-78d35ab e-con-full e-flex e-con e-child\" data-id=\"78d35ab\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t<div class=\"elementor-element elementor-element-79c62d1 e-con-full e-flex e-con e-child\" data-id=\"79c62d1\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-9c555b2 e-con-full e-flex e-con e-child\" data-id=\"9c555b2\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-ab68318 elementor-widget elementor-widget-heading\" data-id=\"ab68318\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">15 mm<\/div>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-872d49c e-con-full e-flex e-con e-child\" data-id=\"872d49c\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-23635d1 elementor-widget elementor-widget-text-editor\" data-id=\"23635d1\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>from here on, instead of prepreg: infusion, wet lay-up or RTM<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-6c71883 e-con-full e-flex e-con e-child\" data-id=\"6c71883\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t<div class=\"elementor-element elementor-element-b17abb0 e-con-full e-flex e-con e-child\" data-id=\"b17abb0\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-a20fbba e-con-full e-flex e-con e-child\" data-id=\"a20fbba\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-76c79ae elementor-widget elementor-widget-heading\" data-id=\"76c79ae\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">0.1\u20130.5 mm<\/div>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-e9d01b0 e-con-full e-flex e-con e-child\" data-id=\"e9d01b0\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-e70c308 elementor-widget elementor-widget-text-editor\" data-id=\"e70c308\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>typically achievable tolerance depending on size and requirements<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-7c84fa9 e-flex e-con-boxed e-con e-parent\" data-id=\"7c84fa9\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t\t\t<div class=\"e-con-inner\">\n\t\t<div class=\"elementor-element elementor-element-7dee272 e-con-full e-flex e-con e-child\" data-id=\"7dee272\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-4d06f70 elementor-widget elementor-widget-text-editor\" data-id=\"4d06f70\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>This page is for design and development engineers who want to estimate whether a part makes sense as a fibre composite \u2013 before they send an enquiry. It names the limits where it fails and the cases in which we advise against it.<\/p><p>Feasibility involves more than manufacturing. A part must also be measurable and testable. What we can do ourselves and what we cannot is explained further down.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-582ecc7 e-con-full e-flex e-con e-child\" data-id=\"582ecc7\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t\t<div class=\"elementor-element elementor-element-9bf6119 elementor-widget elementor-widget-heading\" data-id=\"9bf6119\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<span class=\"elementor-heading-title elementor-size-default\">ON THIS PAGE<\/span>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-31612be e-con-full e-flex e-con e-child\" data-id=\"31612be\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-998ce6c elementor-widget__width-initial elementor-widget elementor-widget-text-editor\" data-id=\"998ce6c\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p><a href=\"#fuenf\">The three questions that decide in five minutes<\/a><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-a9a6a75 elementor-widget__width-initial elementor-widget elementor-widget-text-editor\" data-id=\"a9a6a75\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p><a href=\"#masse\">Do the dimensions fit?<\/a><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-5dd6445 elementor-widget__width-initial elementor-widget elementor-widget-text-editor\" data-id=\"5dd6445\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p><a href=\"#wand\">Does the wall thickness fit?<\/a><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-2948646 elementor-widget__width-initial elementor-widget elementor-widget-text-editor\" data-id=\"2948646\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p><a href=\"#geo\">How complex can the geometry be?<\/a><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-b4d635e elementor-widget__width-initial elementor-widget elementor-widget-text-editor\" data-id=\"b4d635e\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p><a href=\"#tol\">Which tolerances and surfaces can be achieved?<\/a><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-b66ffcf elementor-widget__width-initial elementor-widget elementor-widget-text-editor\" data-id=\"b66ffcf\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p><a href=\"#fehler\">The three most common design mistakes<\/a><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-7b6ac8d elementor-widget__width-initial elementor-widget elementor-widget-text-editor\" data-id=\"7b6ac8d\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p><a href=\"#daten\">What we need to give a binding answer<\/a><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-4b7c288 elementor-widget__width-initial elementor-widget elementor-widget-text-editor\" data-id=\"4b7c288\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p><a href=\"#grenzen\">When we advise against it<\/a><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-a30f997 e-con-full e-flex e-con e-child\" data-id=\"a30f997\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t\t<div class=\"elementor-element elementor-element-8b6cd4b elementor-widget elementor-widget-text-editor\" data-id=\"8b6cd4b\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>\u201cWe manufacture everything from very thin prepreg laminates up to, if need be, 25 millimetres of wall thickness \u2013 and almost independently of the material.\u201d<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-e874f15 elementor-widget elementor-widget-heading\" data-id=\"e874f15\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<span class=\"elementor-heading-title elementor-size-default\">Sebastian Preiss, Head of Engineering, Connova AG<\/span>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-d348ac0 e-con-full e-flex e-con e-child\" data-id=\"d348ac0\" data-element_type=\"container\" data-e-type=\"container\" id=\"fuenf\">\n\t\t<div class=\"elementor-element elementor-element-dc91cca e-con-full e-flex e-con e-child\" data-id=\"dc91cca\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-0faa325 elementor-widget elementor-widget-heading\" data-id=\"0faa325\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<h2 class=\"elementor-heading-title elementor-size-default\">The three questions that decide in five minutes<\/h2>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-c5290ec e-con-full e-flex e-con e-child\" data-id=\"c5290ec\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-0f3464e elementor-widget elementor-widget-text-editor\" data-id=\"0f3464e\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>Before we get to laminate lay-up and verification, we clarify three things. For an assessment in five minutes we need a 3D model \u2013 on a drawing it is not possible to see in that time whether the surfaces can be demoulded.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-40292a3 e-grid e-con-full e-con e-child\" data-id=\"40292a3\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-030c760 e-con-full e-flex e-con e-child\" data-id=\"030c760\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t<div class=\"elementor-element elementor-element-a02e231 e-con-full e-flex e-con e-child\" data-id=\"a02e231\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-982fcb0 e-con-full e-flex e-con e-child\" data-id=\"982fcb0\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-7d65353 elementor-widget elementor-widget-heading\" data-id=\"7d65353\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">01 \/ INDUSTRY<\/div>\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-656a268 elementor-widget elementor-widget-heading\" data-id=\"656a268\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<h3 class=\"elementor-heading-title elementor-size-default\">Does the industry fit?<\/h3>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-848bb84 e-con-full e-flex e-con e-child\" data-id=\"848bb84\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-dfb5072 elementor-widget elementor-widget-text-editor\" data-id=\"dfb5072\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p><a href=\"\/en\/composites-for-aviation\/\">Aviation<\/a> and <a href=\"\/en\/composites-for-space\/\">space<\/a>, <a href=\"\/en\/composites-industry-automation\/\">industry and automation<\/a>, <a href=\"\/en\/composites-for-racing-automotive\/\">motorsport<\/a>, <a href=\"\/en\/composite-materials-and-composites-for-the-marine-industry\/\">marine<\/a>, medical technology. Not mass-produced consumer goods.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-1271f1b e-con-full e-flex e-con e-child\" data-id=\"1271f1b\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t<div class=\"elementor-element elementor-element-e4842fc e-con-full e-flex e-con e-child\" data-id=\"e4842fc\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-ad33413 e-con-full e-flex e-con e-child\" data-id=\"ad33413\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-ac94919 elementor-widget elementor-widget-heading\" data-id=\"ac94919\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">02 \/ DIMENSIONS<\/div>\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-9691b1d elementor-widget elementor-widget-heading\" data-id=\"9691b1d\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<h3 class=\"elementor-heading-title elementor-size-default\">Do the dimensions fit?<\/h3>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-20ed75f e-con-full e-flex e-con e-child\" data-id=\"20ed75f\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-63808a8 elementor-widget elementor-widget-text-editor\" data-id=\"63808a8\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>Too large won\u2019t fit into the autoclave, too small isn\u2019t worth the effort. The values are in the next section.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-d7f0623 e-con-full e-flex e-con e-child\" data-id=\"d7f0623\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t<div class=\"elementor-element elementor-element-de56d2a e-con-full e-flex e-con e-child\" data-id=\"de56d2a\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-2c25f01 e-con-full e-flex e-con e-child\" data-id=\"2c25f01\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-9d5712a elementor-widget elementor-widget-heading\" data-id=\"9d5712a\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">03 \/ REQUIREMENTS<\/div>\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-5a9fb46 elementor-widget elementor-widget-heading\" data-id=\"5a9fb46\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<h3 class=\"elementor-heading-title elementor-size-default\">Do the requirements fit?<\/h3>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-f1edda6 e-con-full e-flex e-con e-child\" data-id=\"f1edda6\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-8a7361f elementor-widget elementor-widget-text-editor\" data-id=\"8a7361f\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>The most difficult of the three. Without particular requirements for weight, stiffness or temperature, metal is almost always cheaper.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-e930ea6 elementor-widget elementor-widget-text-editor\" data-id=\"e930ea6\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>If the requirements don\u2019t fit, we won\u2019t agree on price. We would rather say so early than late.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-81675f8 e-con-full e-flex e-con e-child\" data-id=\"81675f8\" data-element_type=\"container\" data-e-type=\"container\" id=\"masse\">\n\t\t<div class=\"elementor-element elementor-element-b66902c e-con-full e-flex e-con e-child\" data-id=\"b66902c\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-f7af9f5 elementor-widget elementor-widget-heading\" data-id=\"f7af9f5\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<h2 class=\"elementor-heading-title elementor-size-default\">Do the dimensions fit?<\/h2>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-ebf6274 e-con-full e-flex e-con e-child\" data-id=\"ebf6274\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-9c3671e elementor-widget elementor-widget-text-editor\" data-id=\"9c3671e\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>A single component can be up to 1.5 \u00d7 4 m. This limit does not come from the design but from the autoclave \u2013 that is where the laminate cures under pressure and temperature, and the chamber is not any larger.<\/p><p>Assemblies can be larger. Several components are joined, and the practical limit is then no longer the autoclave but the way out: the finished part has to fit through the hall door and around the corners.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-ff1dd38 e-con-full e-flex e-con e-child\" data-id=\"ff1dd38\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-a3948ac e-grid e-con-full e-con e-child\" data-id=\"a3948ac\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-45fc665 e-con-full e-flex e-con e-child\" data-id=\"45fc665\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t\t<div class=\"elementor-element elementor-element-c783b10 elementor-widget elementor-widget-heading\" data-id=\"c783b10\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">Single component, in the autoclave<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-e37b2c4 e-con-full e-flex e-con e-child\" data-id=\"e37b2c4\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-a35a4b0 elementor-widget elementor-widget-heading\" data-id=\"a35a4b0\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">1.5 \u00d7 4 m: size of the autoclave chamber<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-e64d1b3 e-con-full e-flex e-con e-child\" data-id=\"e64d1b3\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t\t<div class=\"elementor-element elementor-element-c758e31 elementor-widget elementor-widget-heading\" data-id=\"c758e31\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">Part, cured in the oven<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-bd344db e-con-full e-flex e-con e-child\" data-id=\"bd344db\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-ef021e4 elementor-widget elementor-widget-heading\" data-id=\"ef021e4\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">3 \u00d7 2.2 \u00d7 2 m: internal dimensions of the oven (width \u00d7 depth \u00d7 height)<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-15b3c47 e-con-full e-flex e-con e-child\" data-id=\"15b3c47\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t\t<div class=\"elementor-element elementor-element-0311d51 elementor-widget elementor-widget-heading\" data-id=\"0311d51\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">Assembly<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-c500a8a e-con-full e-flex e-con e-child\" data-id=\"c500a8a\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-46628d5 elementor-widget elementor-widget-heading\" data-id=\"46628d5\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">larger than 4 m possible: transport route out of the hall<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-aeb96f5 e-con-full e-flex e-con e-child\" data-id=\"aeb96f5\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t\t<div class=\"elementor-element elementor-element-dbc44c1 elementor-widget elementor-widget-heading\" data-id=\"dbc44c1\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">In-house 3D measurement<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-c3341ff e-con-full e-flex e-con e-child\" data-id=\"c3341ff\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-d1720dd elementor-widget elementor-widget-heading\" data-id=\"d1720dd\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">2 \u00d7 2 \u00d7 1.5 m: typical part sizes, special sizes on request<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-2b355ac elementor-widget elementor-widget-text-editor\" data-id=\"2b355ac\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>The figures are guide values from completed projects. For your part, the values we verify in the design apply.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-63680de elementor-widget elementor-widget-image\" data-id=\"63680de\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"image.default\">\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<img fetchpriority=\"high\" decoding=\"async\" width=\"1772\" height=\"996\" src=\"https:\/\/www.connova.com\/wp-content\/uploads\/2025\/09\/02_04_02_prepeg_sRGB_800x450px.webp\" class=\"attachment-full size-full wp-image-2025\" alt=\"Connova autoclave for curing CFRP parts\" srcset=\"https:\/\/www.connova.com\/wp-content\/uploads\/2025\/09\/02_04_02_prepeg_sRGB_800x450px.webp 1772w, https:\/\/www.connova.com\/wp-content\/uploads\/2025\/09\/02_04_02_prepeg_sRGB_800x450px-300x169.webp 300w, https:\/\/www.connova.com\/wp-content\/uploads\/2025\/09\/02_04_02_prepeg_sRGB_800x450px-1024x576.webp 1024w, https:\/\/www.connova.com\/wp-content\/uploads\/2025\/09\/02_04_02_prepeg_sRGB_800x450px-768x432.webp 768w, https:\/\/www.connova.com\/wp-content\/uploads\/2025\/09\/02_04_02_prepeg_sRGB_800x450px-1536x863.webp 1536w\" sizes=\"(max-width: 1772px) 100vw, 1772px\" \/>\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-bcd0868 elementor-widget elementor-widget-text-editor\" data-id=\"bcd0868\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>The autoclave sets the limit: 1.5 \u00d7 4 m per single component. \u00b7 Source: Connova AG<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-afa39a2 e-con-full e-flex e-con e-child\" data-id=\"afa39a2\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t\t<div class=\"elementor-element elementor-element-4a1c39c elementor-widget__width-inherit elementor-widget elementor-widget-text-editor\" data-id=\"4a1c39c\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>Not sure whether your dimensions still fit? Send us the model \u2013 one look and you will know.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-2edffb0 elementor-align-right elementor-mobile-align-left elementor-widget__width-inherit elementor-widget elementor-widget-button\" data-id=\"2edffb0\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"button.default\">\n\t\t\t\t\t\t\t\t\t\t<a class=\"elementor-button elementor-button-link elementor-size-sm\" href=\"#beratung\">\n\t\t\t\t\t\t<span class=\"elementor-button-content-wrapper\">\n\t\t\t\t\t\t<span class=\"elementor-button-icon\">\n\t\t\t\t<svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" xmlns:xlink=\"http:\/\/www.w3.org\/1999\/xlink\" width=\"20\" height=\"20\" viewBox=\"0 0 20 20\" fill=\"none\"><rect width=\"20\" height=\"20\" fill=\"url(#pattern0_1194_5)\"><\/rect><defs><pattern id=\"pattern0_1194_5\" patternContentUnits=\"objectBoundingBox\" width=\"1\" height=\"1\"><use xlink:href=\"#image0_1194_5\" transform=\"scale(0.05)\"><\/use><\/pattern><image id=\"image0_1194_5\" width=\"20\" height=\"20\" preserveAspectRatio=\"none\" xlink:href=\"data:image\/png;base64,iVBORw0KGgoAAAANSUhEUgAAABQAAAAUCAYAAACNiR0NAAAACXBIWXMAAAsTAAALEwEAmpwYAAAAAXNSR0IArs4c6QAAAARnQU1BAACxjwv8YQUAAAFkSURBVHgBnZWxSsNQFIZ\/W6XFqhSx4uBQ0EUXs7u4uYgGOuliN0fBB7DiA9iM4iC4OFm7OAuOTsmuEkXBapFK28FG7PHcNtJabm9u+sFpw82fj5tDcgJIIKIk1y5XkculDra\/tg1dOGxyVSgYN1DMgTyFJ9dPlqPByffKsrKU937HdU+amN1CV5ZosOz1dJNq9oWGr9X3ZFTsjp1ZWRuiiUnE55bxeW2h6dURmzWgIM71FuGfDVVqeGIG01sn8MoP+LjaRwArQpgOSkViY5haOwTxcfX2TBVdEkIDmowbGXzzThWkIwjDEKHZqCsjQvgITWr2JUYXV1URRwgdBEC8q3Jhr\/WfWFAKn4TwRpX4qZZQOt\/BSGoeqcwRAij+TZZKvzfl5XidH+yCxnNNbueW2hNG+qZ8PTukyf\/JwwsWDc6BtAHiBIXHUnaV2pPH1RCJvpvQxReLcW93SVx\/TXwekrLrfgEz+dpm2a1QJAAAAABJRU5ErkJggg==\"><\/image><\/defs><\/svg>\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"elementor-button-text\">Check feasibility<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-3429515 e-con-full e-flex e-con e-child\" data-id=\"3429515\" data-element_type=\"container\" data-e-type=\"container\" id=\"wand\">\n\t\t<div class=\"elementor-element elementor-element-087ee90 e-con-full e-flex e-con e-child\" data-id=\"087ee90\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-48b7773 elementor-widget elementor-widget-heading\" data-id=\"48b7773\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<h2 class=\"elementor-heading-title elementor-size-default\">Does the wall thickness fit?<\/h2>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-c85ce46 e-con-full e-flex e-con e-child\" data-id=\"c85ce46\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-d22e424 elementor-widget elementor-widget-text-editor\" data-id=\"d22e424\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>The range extends from 0.3 mm to 25 mm and is almost independent of the material. 0.3 mm corresponds to a sandwich face sheet made of four plies. 25 mm was achieved on a structural part for the rail industry that was produced in two cures \u2013 a one-off, not a series figure.<\/p><p>The normal range for monolithic CFRP in prepreg is 8 to 10 mm. From around 15 mm you leave the prepreg process: pressure is then needed to get the resin through the thickness, and with it <a href=\"\/en\/competencies\/vacuum-infusion-technology\/\">vacuum infusion, wet lay-up or RTM<\/a>.<\/p><p>From about 10 to 12 mm, a second effect comes into play that many underestimate: the exotherm. During curing, the resin releases chemical energy. The thicker the laminate, the more heat builds up inside. This can only be controlled with a slow heating ramp and dwell points \u2013 not with the standard cycle.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-b69f8ee e-con-full e-flex e-con e-child\" data-id=\"b69f8ee\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-55eb6f1 e-grid e-con-full e-con e-child\" data-id=\"55eb6f1\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-0e479f8 e-con-full e-flex e-con e-child\" data-id=\"0e479f8\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t\t<div class=\"elementor-element elementor-element-5190040 elementor-widget elementor-widget-heading\" data-id=\"5190040\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">Thinnest wall thickness produced<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-0507ccc e-con-full e-flex e-con e-child\" data-id=\"0507ccc\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-b3e1bd7 elementor-widget elementor-widget-heading\" data-id=\"b3e1bd7\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">0.3 mm: sandwich face sheet made of four plies<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-13b4096 e-con-full e-flex e-con e-child\" data-id=\"13b4096\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t\t<div class=\"elementor-element elementor-element-c8062a6 elementor-widget elementor-widget-heading\" data-id=\"c8062a6\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">Normal range for monolithic CFRP<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-22ae4a1 e-con-full e-flex e-con e-child\" data-id=\"22ae4a1\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-8b94b3f elementor-widget elementor-widget-heading\" data-id=\"8b94b3f\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">1 to 4 mm: monolithic regularly also 8 to 10 mm<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-75541dc e-con-full e-flex e-con e-child\" data-id=\"75541dc\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t\t<div class=\"elementor-element elementor-element-e14d9cc elementor-widget elementor-widget-heading\" data-id=\"e14d9cc\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">GFRP<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-4a2119c e-con-full e-flex e-con e-child\" data-id=\"4a2119c\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-cfc3ee2 elementor-widget elementor-widget-heading\" data-id=\"cfc3ee2\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">3 to 8 mm: typical wall thickness<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-62a5b73 e-con-full e-flex e-con e-child\" data-id=\"62a5b73\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t\t<div class=\"elementor-element elementor-element-8306f48 elementor-widget elementor-widget-heading\" data-id=\"8306f48\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">Transition to infusion, wet lay-up, RTM<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-88526c4 e-con-full e-flex e-con e-child\" data-id=\"88526c4\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-aed9c33 elementor-widget elementor-widget-heading\" data-id=\"aed9c33\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">from around 15 mm: above this, prepreg is a special build<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-fd0557b e-con-full e-flex e-con e-child\" data-id=\"fd0557b\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t\t<div class=\"elementor-element elementor-element-d15a4fa elementor-widget elementor-widget-heading\" data-id=\"d15a4fa\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">Thickest wall thickness produced<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-945a3fc e-con-full e-flex e-con e-child\" data-id=\"945a3fc\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-9b2a90b elementor-widget elementor-widget-heading\" data-id=\"9b2a90b\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">25 mm: rail structural part, two cures<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-e69b4ec elementor-widget elementor-widget-text-editor\" data-id=\"e69b4ec\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>The figures are guide values from completed projects. For your part, the values we verify in the design apply.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-79c659a e-con-full e-flex e-con e-child\" data-id=\"79c659a\" data-element_type=\"container\" data-e-type=\"container\" id=\"geo\">\n\t\t<div class=\"elementor-element elementor-element-0ab62c0 e-con-full e-flex e-con e-child\" data-id=\"0ab62c0\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-bac8531 elementor-widget elementor-widget-heading\" data-id=\"bac8531\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<h2 class=\"elementor-heading-title elementor-size-default\">How complex can the geometry be?<\/h2>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-aaaa23e e-con-full e-flex e-con e-child\" data-id=\"aaaa23e\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-9132f94 elementor-widget elementor-widget-text-editor\" data-id=\"9132f94\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>Complex free-form surfaces are not an obstacle. Neither are undercuts \u2013 they are solved with split moulds. A complete racing car front with recesses, raised areas and light and cooling ducts leads to a mould split into several parts, but it is feasible.<\/p><p>Conversely, an aircraft nose is comparatively simple despite its strong curvature: aerodynamically smooth, without undercuts, easy to demould. In manufacturing terms, complexity does not mean \u201cstrongly curved\u201d but \u201cdifficult to demould\u201d.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-e5414b3 e-con-full e-flex e-con e-child\" data-id=\"e5414b3\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t\t<div class=\"elementor-element elementor-element-c7992c7 elementor-widget elementor-widget-heading\" data-id=\"c7992c7\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<span class=\"elementor-heading-title elementor-size-default\">What doesn\u2019t work: moulding ribs onto a shell<\/span>\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-ee222c2 elementor-widget__width-inherit elementor-widget elementor-widget-text-editor\" data-id=\"ee222c2\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>At least not in the prepreg autoclave process. This is the most common misunderstanding in initial enquiries. Anyone who has a milled metal structure in mind expects to be able to reproduce the same geometry in CFRP. In CFRP, ribs are made as separate parts and joined \u2013 differential construction.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-63e97fd elementor-widget elementor-widget-image\" data-id=\"63e97fd\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"image.default\">\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<img decoding=\"async\" width=\"800\" height=\"450\" src=\"https:\/\/www.connova.com\/wp-content\/uploads\/2025\/09\/03_06_03_Besi-Wippe_sRGB_800x450px.jpg\" class=\"attachment-full size-full wp-image-1652\" alt=\"CFRP part with metal fittings in differential construction\" srcset=\"https:\/\/www.connova.com\/wp-content\/uploads\/2025\/09\/03_06_03_Besi-Wippe_sRGB_800x450px.jpg 800w, https:\/\/www.connova.com\/wp-content\/uploads\/2025\/09\/03_06_03_Besi-Wippe_sRGB_800x450px-300x169.jpg 300w, https:\/\/www.connova.com\/wp-content\/uploads\/2025\/09\/03_06_03_Besi-Wippe_sRGB_800x450px-768x432.jpg 768w\" sizes=\"(max-width: 800px) 100vw, 800px\" \/>\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-a7020b7 elementor-widget elementor-widget-text-editor\" data-id=\"a7020b7\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>Differential construction: the CFRP structure carries the load, metal fittings handle the load introduction. \u00b7 Source: Connova AG<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-e0cef41 e-con-full e-flex e-con e-child\" data-id=\"e0cef41\" data-element_type=\"container\" data-e-type=\"container\" id=\"tol\">\n\t\t<div class=\"elementor-element elementor-element-acb9fab e-con-full e-flex e-con e-child\" data-id=\"acb9fab\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-e983fac elementor-widget elementor-widget-heading\" data-id=\"e983fac\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<h2 class=\"elementor-heading-title elementor-size-default\">Which tolerances and surfaces can be achieved?<\/h2>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-9b18282 e-con-full e-flex e-con e-child\" data-id=\"9b18282\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-924774b elementor-widget elementor-widget-text-editor\" data-id=\"924774b\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>Depending on part size, complexity and requirements, the achievable tolerances are typically between 0.1 and 0.5 mm.<\/p><p>The way there leads through the mould. A mould made to within 0.1 to 0.2 mm delivers a part that is about 0.2 mm above that. Metal moulds are usually more accurate because they are milled directly. Composite moulds are themselves made from a mould and lose some accuracy in the process.<\/p><p>Then there is heat. In the autoclave, the mould and the part expand differently. This has to be anticipated in the mould design \u2013 that is where the real work lies, not in the laminating.<\/p><p>For surfaces, a simple rule applies: the better the mould surface, the better the part surface. That is why it pays to invest the effort in the mould as soon as it is used more than once. We do not measure roughness on the CFRP surface itself \u2013 realistically it is more like Ra 3.2, because porosity and pinholes play a role. This is only relevant where the CFRP remains visible or is painted anyway: on about a third of parts.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-3a27694 e-con-full e-flex e-con e-child\" data-id=\"3a27694\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-3056174 e-grid e-con-full e-con e-child\" data-id=\"3056174\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-9161e0f e-con-full e-flex e-con e-child\" data-id=\"9161e0f\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t\t<div class=\"elementor-element elementor-element-c654c6a elementor-widget elementor-widget-heading\" data-id=\"c654c6a\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">One-sided mould<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-b2f9114 e-con-full e-flex e-con e-child\" data-id=\"b2f9114\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-9344c08 elementor-widget elementor-widget-heading\" data-id=\"9344c08\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">around 0.3 mm<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-0253b71 e-con-full e-flex e-con e-child\" data-id=\"0253b71\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t\t<div class=\"elementor-element elementor-element-30b2c69 elementor-widget elementor-widget-heading\" data-id=\"30b2c69\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">Closed mould<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-cb79062 e-con-full e-flex e-con e-child\" data-id=\"cb79062\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-c2c0cf7 elementor-widget elementor-widget-heading\" data-id=\"c2c0cf7\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">down to around 0.1 mm<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-dbcedbc e-con-full e-flex e-con e-child\" data-id=\"dbcedbc\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t\t<div class=\"elementor-element elementor-element-5b5d332 elementor-widget elementor-widget-heading\" data-id=\"5b5d332\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">Wall thickness in the press process<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-597077e e-con-full e-flex e-con e-child\" data-id=\"597077e\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-7232836 elementor-widget elementor-widget-heading\" data-id=\"7232836\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">better than 0.2 mm<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-40f7813 e-con-full e-flex e-con e-child\" data-id=\"40f7813\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t\t<div class=\"elementor-element elementor-element-16f0856 elementor-widget elementor-widget-heading\" data-id=\"16f0856\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">CNC rework, e.g. insert positions<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-4cdb651 e-con-full e-flex e-con e-child\" data-id=\"4cdb651\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-6ac6168 elementor-widget elementor-widget-heading\" data-id=\"6ac6168\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">a few hundredths<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-83cd733 e-con-full e-flex e-con e-child\" data-id=\"83cd733\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t\t<div class=\"elementor-element elementor-element-d48cf5b elementor-widget elementor-widget-heading\" data-id=\"d48cf5b\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">Mould surface, standard<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-1028828 e-con-full e-flex e-con e-child\" data-id=\"1028828\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-5f36427 elementor-widget elementor-widget-heading\" data-id=\"5f36427\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">Ra 1.6<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-e57878f e-con-full e-flex e-con e-child\" data-id=\"e57878f\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t\t<div class=\"elementor-element elementor-element-9f1e6d8 elementor-widget elementor-widget-heading\" data-id=\"9f1e6d8\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">Mould surface, on request<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-7ec5b3f e-con-full e-flex e-con e-child\" data-id=\"7ec5b3f\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-4380eeb elementor-widget elementor-widget-heading\" data-id=\"4380eeb\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">Ra 0.8<\/div>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-d0c4558 elementor-widget elementor-widget-text-editor\" data-id=\"d0c4558\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>A general tolerance statement remains a simplification: dimensions, wall thickness, dimensional stability, position tolerance, flatness and perpendicularity are different things and are achieved in different ways. The figures are guide values from completed projects.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-841f00d e-con-full e-flex e-con e-child\" data-id=\"841f00d\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-a10da20 elementor-widget elementor-widget-heading\" data-id=\"a10da20\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<span class=\"elementor-heading-title elementor-size-default\">THREE EXAMPLES FROM PRODUCTION \u2014 ANONYMISED<\/span>\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-b88ecd5 elementor-widget elementor-widget-text-editor\" data-id=\"b88ecd5\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p><strong>Gripper beam for packaging technology.<\/strong> Made in a closed mould; the accuracy is set via the gap. Around 0.1 mm is achieved.<\/p><p><strong>Telescope structure with 4.8 mm wall thickness.<\/strong> Laminated in the press process, wall thickness tolerance approx. \u00b1 0.1 mm. The contour is above that \u2013 the wall thickness is the value that is set here.<\/p><p><strong>Wound products follow different rules.<\/strong> On the winding mandrel, i.e. on the inside, accuracy is in the hundredths range. On the outside, the raw tube is considerably less accurate. Only external cylindrical grinding brings the outer diameter into the hundredths range too \u2013 an additional process step that is reflected in the price.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-b9c429a e-con-full e-flex e-con e-child\" data-id=\"b9c429a\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t\t<div class=\"elementor-element elementor-element-4ff7abc elementor-widget elementor-widget-text-editor\" data-id=\"4ff7abc\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>Which tolerance your part really needs becomes clear at the interface. Send us the mating dimensions as well.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-606b6da elementor-align-right elementor-mobile-align-left elementor-widget__width-initial elementor-widget elementor-widget-button\" data-id=\"606b6da\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"button.default\">\n\t\t\t\t\t\t\t\t\t\t<a class=\"elementor-button elementor-button-link elementor-size-sm\" href=\"#beratung\">\n\t\t\t\t\t\t<span class=\"elementor-button-content-wrapper\">\n\t\t\t\t\t\t<span class=\"elementor-button-icon\">\n\t\t\t\t<svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" xmlns:xlink=\"http:\/\/www.w3.org\/1999\/xlink\" width=\"20\" height=\"20\" viewBox=\"0 0 20 20\" fill=\"none\"><rect width=\"20\" height=\"20\" fill=\"url(#pattern0_1194_5)\"><\/rect><defs><pattern id=\"pattern0_1194_5\" patternContentUnits=\"objectBoundingBox\" width=\"1\" height=\"1\"><use xlink:href=\"#image0_1194_5\" transform=\"scale(0.05)\"><\/use><\/pattern><image id=\"image0_1194_5\" width=\"20\" height=\"20\" preserveAspectRatio=\"none\" xlink:href=\"data:image\/png;base64,iVBORw0KGgoAAAANSUhEUgAAABQAAAAUCAYAAACNiR0NAAAACXBIWXMAAAsTAAALEwEAmpwYAAAAAXNSR0IArs4c6QAAAARnQU1BAACxjwv8YQUAAAFkSURBVHgBnZWxSsNQFIZ\/W6XFqhSx4uBQ0EUXs7u4uYgGOuliN0fBB7DiA9iM4iC4OFm7OAuOTsmuEkXBapFK28FG7PHcNtJabm9u+sFpw82fj5tDcgJIIKIk1y5XkculDra\/tg1dOGxyVSgYN1DMgTyFJ9dPlqPByffKsrKU937HdU+amN1CV5ZosOz1dJNq9oWGr9X3ZFTsjp1ZWRuiiUnE55bxeW2h6dURmzWgIM71FuGfDVVqeGIG01sn8MoP+LjaRwArQpgOSkViY5haOwTxcfX2TBVdEkIDmowbGXzzThWkIwjDEKHZqCsjQvgITWr2JUYXV1URRwgdBEC8q3Jhr\/WfWFAKn4TwRpX4qZZQOt\/BSGoeqcwRAij+TZZKvzfl5XidH+yCxnNNbueW2hNG+qZ8PTukyf\/JwwsWDc6BtAHiBIXHUnaV2pPH1RCJvpvQxReLcW93SVx\/TXwekrLrfgEz+dpm2a1QJAAAAABJRU5ErkJggg==\"><\/image><\/defs><\/svg>\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"elementor-button-text\">Request an assessment<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-f2cde72 e-con-full e-flex e-con e-child\" data-id=\"f2cde72\" data-element_type=\"container\" data-e-type=\"container\" id=\"fehler\">\n\t\t<div class=\"elementor-element elementor-element-793d1fd e-con-full e-flex e-con e-child\" data-id=\"793d1fd\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-f3a6aed elementor-widget elementor-widget-heading\" data-id=\"f3a6aed\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<h2 class=\"elementor-heading-title elementor-size-default\">The three most common design mistakes<\/h2>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-cde04a9 e-con-full e-flex e-con e-child\" data-id=\"cde04a9\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-f8556f0 elementor-widget elementor-widget-text-editor\" data-id=\"f8556f0\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>The cause is usually the same: parts are designed out of habit for isotropic materials. Metal behaves the same in all directions, a laminate does not.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-46c12a4 e-grid e-con-full e-con e-child\" data-id=\"46c12a4\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-d91a605 e-con-full e-flex e-con e-child\" data-id=\"d91a605\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t<div class=\"elementor-element elementor-element-557ce66 e-con-full e-flex e-con e-child\" data-id=\"557ce66\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-49e3768 e-con-full e-flex e-con e-child\" data-id=\"49e3768\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-242d13d elementor-widget elementor-widget-heading\" data-id=\"242d13d\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">01 \/ ASKED TOO LATE<\/div>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-dbfe32a e-con-full e-flex e-con e-child\" data-id=\"dbfe32a\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-747e3c5 elementor-widget elementor-widget-text-editor\" data-id=\"747e3c5\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>Composite specialists only get involved when the design is already finished. By then the expensive decisions have been made.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-286423e e-con-full e-flex e-con e-child\" data-id=\"286423e\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t<div class=\"elementor-element elementor-element-1dc61a4 e-con-full e-flex e-con e-child\" data-id=\"1dc61a4\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-c86f8c4 e-con-full e-flex e-con e-child\" data-id=\"c86f8c4\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-f4de346 elementor-widget elementor-widget-heading\" data-id=\"f4de346\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">02 \/ LOAD INTRODUCTION<\/div>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-f7e824f e-con-full e-flex e-con e-child\" data-id=\"f7e824f\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-e3731c4 elementor-widget elementor-widget-text-editor\" data-id=\"e3731c4\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>Too localised. Every hole cuts through fibres and weakens the part locally. Where a hole is needed, edge distance, diameter, placement and locally increased wall thickness matter.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-825a4c1 e-con-full e-flex e-con e-child\" data-id=\"825a4c1\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t<div class=\"elementor-element elementor-element-80eef7f e-con-full e-flex e-con e-child\" data-id=\"80eef7f\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-f3e76b6 e-con-full e-flex e-con e-child\" data-id=\"f3e76b6\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-75fa680 elementor-widget elementor-widget-heading\" data-id=\"75fa680\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">03 \/ RADII TOO SHARP<\/div>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-4ab75df e-con-full e-flex e-con e-child\" data-id=\"4ab75df\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-23ef5bd elementor-widget elementor-widget-text-editor\" data-id=\"23ef5bd\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>A fibre cannot be forced sharply around an edge; there it no longer transmits any force. In practice, minimum radii are the number one topic.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-9b3e5d8 e-con-full e-flex e-con e-child\" data-id=\"9b3e5d8\" data-element_type=\"container\" data-e-type=\"container\" id=\"daten\">\n\t\t<div class=\"elementor-element elementor-element-fef3e72 e-con-full e-flex e-con e-child\" data-id=\"fef3e72\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-a3c33b4 elementor-widget elementor-widget-heading\" data-id=\"a3c33b4\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<h2 class=\"elementor-heading-title elementor-size-default\">What we need to give a binding answer<\/h2>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-3f832b1 e-con-full e-flex e-con e-child\" data-id=\"3f832b1\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-6febd8b elementor-widget elementor-widget-text-editor\" data-id=\"6febd8b\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>A complete data package: 3D data, drawings, requirements and \u2013 where available \u2013 limit samples and test specifications.<\/p><p>The interfaces are decisive. How is the part supported and connected? Where are loads introduced and where do they flow out? A structural part must transmit forces without being damaged \u2013 this can only be assessed once it is clear how it sits in the higher-level system.<\/p><p>If something is missing, we ask. Not every question can be answered straight away, because some things have not yet been decided. Then we say so: as long as information is missing, there is no binding feasibility statement. The answer is reached iteratively.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-3db6870 e-con-full e-flex e-con e-child\" data-id=\"3db6870\" data-element_type=\"container\" data-e-type=\"container\" id=\"grenzen\">\n\t\t<div class=\"elementor-element elementor-element-e11da0b e-con-full e-flex e-con e-child\" data-id=\"e11da0b\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-2128e92 elementor-widget elementor-widget-heading\" data-id=\"2128e92\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<h2 class=\"elementor-heading-title elementor-size-default\">When we advise against it<\/h2>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-227c9a1 e-con-full e-flex e-con e-child\" data-id=\"227c9a1\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-97d967b elementor-widget elementor-widget-text-editor\" data-id=\"97d967b\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>Four cases are technically feasible and still not a good idea.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-85a0327 elementor-widget elementor-widget-text-editor\" data-id=\"85a0327\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p><strong>Milling CFRP from solid.<\/strong> More than 90 % of the fibres are cut in the process. What remains holds like a pure plastic part. Possible as a design object, not as a structural part.<\/p><p><strong>Very small parts<\/strong> such as eyelets, hooks or small inserts. They have to transmit a lot of force over a small area and offer hardly any lightweight potential. Aluminium or titanium is the better choice there. There is a good reason why screws and threaded inserts are not made from CFRP.<\/p><p><strong>Small fittings in CFRP.<\/strong> The combination is more common and more sensible: a large CFRP structure with metal end fittings and brackets made of aluminium, titanium or stainless steel.<\/p><p><strong>Extreme material accumulations.<\/strong> In steel, local thicknesses of 30 to 50 mm are not unusual. In CFRP this is atypical. Around 90 % of composite structures are thin-walled relative to their overall dimensions \u2013 that is precisely where their advantage lies.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-b0c8ccb e-con-full e-flex e-con e-child\" data-id=\"b0c8ccb\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t\t<div class=\"elementor-element elementor-element-adde477 elementor-widget elementor-widget-text-editor\" data-id=\"adde477\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>Then there is the quantity. Connova AG is set up for demanding parts in manageable quantities, not for highly automated mass production. This does not apply to wound products: Connova Deutschland produces rings and sleeves in quantities of up to around 50,000 per year.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-f2b901f elementor-widget elementor-widget-text-editor\" data-id=\"f2b901f\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>And the most common case of all: the limitation is often not technical feasibility but cost-effectiveness. What it costs and when it pays off is covered on the pages about costs and about where CFRP reaches its limits.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-a6a91a7 e-con-full e-flex e-con e-child\" data-id=\"a6a91a7\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-44b61ce e-con-full e-flex e-con e-child\" data-id=\"44b61ce\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-f3716d2 elementor-widget elementor-widget-heading\" data-id=\"f3716d2\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<h2 class=\"elementor-heading-title elementor-size-default\">What Connova offers<\/h2>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-66a07cd e-con-full e-flex e-con e-child\" data-id=\"66a07cd\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-d43c303 e-con-full e-flex e-con e-child\" data-id=\"d43c303\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-b8c1912 e-con-full e-flex e-con e-child\" data-id=\"b8c1912\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-de1d51a e-con-full e-flex e-con e-child\" data-id=\"de1d51a\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-575a0e8 elementor-widget elementor-widget-heading\" data-id=\"575a0e8\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<h3 class=\"elementor-heading-title elementor-size-default\">Feasibility check<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-6521eb6 elementor-widget elementor-widget-heading\" data-id=\"6521eb6\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<span class=\"elementor-heading-title elementor-size-default\">Based on your 3D data<\/span>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-ce79955 e-con-full e-flex e-con e-child\" data-id=\"ce79955\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-d493b72 elementor-widget elementor-widget-text-editor\" data-id=\"d493b72\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>Initial assessment of dimensions, wall thicknesses and demouldability \u2013 before you invest effort.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-70dedcf e-con-full e-flex e-con e-child\" data-id=\"70dedcf\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-47d1133 elementor-align-left elementor-widget elementor-widget-button\" data-id=\"47d1133\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"button.default\">\n\t\t\t\t\t\t\t\t\t\t<a class=\"elementor-button elementor-button-link elementor-size-sm\" href=\"\/en\/free-consulting\/\">\n\t\t\t\t\t\t<span class=\"elementor-button-content-wrapper\">\n\t\t\t\t\t\t<span class=\"elementor-button-icon\">\n\t\t\t\t<svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" xmlns:xlink=\"http:\/\/www.w3.org\/1999\/xlink\" width=\"20\" height=\"20\" viewBox=\"0 0 20 20\" fill=\"none\"><rect width=\"20\" height=\"20\" fill=\"url(#pattern0_1194_5)\"><\/rect><defs><pattern id=\"pattern0_1194_5\" patternContentUnits=\"objectBoundingBox\" width=\"1\" height=\"1\"><use xlink:href=\"#image0_1194_5\" transform=\"scale(0.05)\"><\/use><\/pattern><image id=\"image0_1194_5\" width=\"20\" height=\"20\" preserveAspectRatio=\"none\" xlink:href=\"data:image\/png;base64,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\"><\/image><\/defs><\/svg>\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"elementor-button-text\">Request consultation<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-edacfe2 e-con-full e-flex e-con e-child\" data-id=\"edacfe2\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-f6afb39 e-con-full e-flex e-con e-child\" data-id=\"f6afb39\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-cfe1128 elementor-widget elementor-widget-heading\" data-id=\"cfe1128\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<h3 class=\"elementor-heading-title elementor-size-default\">Design and calculation<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-aca47d5 elementor-widget elementor-widget-heading\" data-id=\"aca47d5\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<span class=\"elementor-heading-title elementor-size-default\">Design and mould design<\/span>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-775fc78 e-con-full e-flex e-con e-child\" data-id=\"775fc78\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-f6374a2 elementor-widget elementor-widget-text-editor\" data-id=\"f6374a2\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>Including compensating for thermal distortion in the mould \u2013 the point at which the final tolerance is decided.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-c638720 e-con-full e-flex e-con e-child\" data-id=\"c638720\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-c6866f5 elementor-align-left elementor-widget elementor-widget-button\" data-id=\"c6866f5\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"button.default\">\n\t\t\t\t\t\t\t\t\t\t<a class=\"elementor-button elementor-button-link elementor-size-sm\" href=\"\/en\/competencies\/design-and-calculation\/\">\n\t\t\t\t\t\t<span class=\"elementor-button-content-wrapper\">\n\t\t\t\t\t\t<span class=\"elementor-button-icon\">\n\t\t\t\t<svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" xmlns:xlink=\"http:\/\/www.w3.org\/1999\/xlink\" width=\"20\" height=\"20\" viewBox=\"0 0 20 20\" fill=\"none\"><rect width=\"20\" height=\"20\" fill=\"url(#pattern0_1194_5)\"><\/rect><defs><pattern id=\"pattern0_1194_5\" patternContentUnits=\"objectBoundingBox\" width=\"1\" height=\"1\"><use xlink:href=\"#image0_1194_5\" transform=\"scale(0.05)\"><\/use><\/pattern><image id=\"image0_1194_5\" width=\"20\" height=\"20\" preserveAspectRatio=\"none\" xlink:href=\"data:image\/png;base64,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\"><\/image><\/defs><\/svg>\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"elementor-button-text\">Design and calculation<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-b395a9e e-con-full e-flex e-con e-child\" data-id=\"b395a9e\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-2a2f088 e-con-full e-flex e-con e-child\" data-id=\"2a2f088\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-68e5301 elementor-widget elementor-widget-heading\" data-id=\"68e5301\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<h3 class=\"elementor-heading-title elementor-size-default\">In-house measurement<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-05e6f98 elementor-widget elementor-widget-heading\" data-id=\"05e6f98\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<span class=\"elementor-heading-title elementor-size-default\">3D measurement with a measuring arm<\/span>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-aeb161f e-con-full e-flex e-con e-child\" data-id=\"aeb161f\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-eb2f0fb elementor-widget elementor-widget-text-editor\" data-id=\"eb2f0fb\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>Parts and moulds are measured three-dimensionally in-house, even with complex geometry.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-3041788 e-con-full e-flex e-con e-child\" data-id=\"3041788\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-6e56ec7 elementor-align-left elementor-widget elementor-widget-button\" data-id=\"6e56ec7\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"button.default\">\n\t\t\t\t\t\t\t\t\t\t<a class=\"elementor-button elementor-button-link elementor-size-sm\" href=\"\/en\/competencies\/measurement-and-testing\/\">\n\t\t\t\t\t\t<span class=\"elementor-button-content-wrapper\">\n\t\t\t\t\t\t<span class=\"elementor-button-icon\">\n\t\t\t\t<svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" xmlns:xlink=\"http:\/\/www.w3.org\/1999\/xlink\" width=\"20\" height=\"20\" viewBox=\"0 0 20 20\" fill=\"none\"><rect width=\"20\" height=\"20\" fill=\"url(#pattern0_1194_5)\"><\/rect><defs><pattern id=\"pattern0_1194_5\" patternContentUnits=\"objectBoundingBox\" width=\"1\" height=\"1\"><use xlink:href=\"#image0_1194_5\" transform=\"scale(0.05)\"><\/use><\/pattern><image id=\"image0_1194_5\" width=\"20\" height=\"20\" preserveAspectRatio=\"none\" xlink:href=\"data:image\/png;base64,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\"><\/image><\/defs><\/svg>\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"elementor-button-text\">Measurement and testing<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-688c1df e-con-full e-flex e-con e-child\" data-id=\"688c1df\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-499e5ed e-con-full e-flex e-con e-child\" data-id=\"499e5ed\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-d772960 elementor-widget elementor-widget-heading\" data-id=\"d772960\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<h3 class=\"elementor-heading-title elementor-size-default\">Non-destructive testing<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-d255bd0 elementor-widget elementor-widget-heading\" data-id=\"d255bd0\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<span class=\"elementor-heading-title elementor-size-default\">Via a partner network, not in-house<\/span>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-fef1d99 e-con-full e-flex e-con e-child\" data-id=\"fef1d99\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-a7b1209 elementor-widget elementor-widget-text-editor\" data-id=\"a7b1209\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>We do not carry out ultrasonic, CT or X-ray testing ourselves. We organise them through vetted partners.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-d837bf7 e-con-full e-flex e-con e-child\" data-id=\"d837bf7\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-78c29b1 elementor-align-left elementor-widget elementor-widget-button\" data-id=\"78c29b1\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"button.default\">\n\t\t\t\t\t\t\t\t\t\t<a class=\"elementor-button elementor-button-link elementor-size-sm\" href=\"\/en\/competencies\/quality-assurance\/\">\n\t\t\t\t\t\t<span class=\"elementor-button-content-wrapper\">\n\t\t\t\t\t\t<span class=\"elementor-button-icon\">\n\t\t\t\t<svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" xmlns:xlink=\"http:\/\/www.w3.org\/1999\/xlink\" width=\"20\" height=\"20\" viewBox=\"0 0 20 20\" fill=\"none\"><rect width=\"20\" height=\"20\" fill=\"url(#pattern0_1194_5)\"><\/rect><defs><pattern id=\"pattern0_1194_5\" patternContentUnits=\"objectBoundingBox\" width=\"1\" height=\"1\"><use xlink:href=\"#image0_1194_5\" transform=\"scale(0.05)\"><\/use><\/pattern><image id=\"image0_1194_5\" width=\"20\" height=\"20\" preserveAspectRatio=\"none\" xlink:href=\"data:image\/png;base64,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\"><\/image><\/defs><\/svg>\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"elementor-button-text\">Quality assurance<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-aa7d4e7 e-con-full e-flex e-con e-child\" data-id=\"aa7d4e7\" data-element_type=\"container\" data-e-type=\"container\" id=\"beratung\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t<div class=\"elementor-element elementor-element-b57f33b e-con-full e-flex e-con e-child\" data-id=\"b57f33b\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-4a2957b elementor-widget elementor-widget-heading\" data-id=\"4a2957b\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<h2 class=\"elementor-heading-title elementor-size-default\">Have feasibility checked \u2013 free of obligation<\/h2>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-36dd846 e-con-full e-flex e-con e-child\" data-id=\"36dd846\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-d367c4a elementor-widget elementor-widget-text-editor\" data-id=\"d367c4a\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>You don\u2019t have to decide anything to get an assessment. The free consultation costs you one conversation and gives you a statement you can work with internally \u2013 even if it says that CFRP is not the right choice for your part.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-8be21ba e-grid e-con-full e-con e-child\" data-id=\"8be21ba\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-87b59e5 e-con-full e-flex e-con e-child\" data-id=\"87b59e5\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t<div class=\"elementor-element elementor-element-39169f7 e-con-full e-flex e-con e-child\" data-id=\"39169f7\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-a586075 e-con-full e-flex e-con e-child\" data-id=\"a586075\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-28f61d9 elementor-widget elementor-widget-heading\" data-id=\"28f61d9\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">01 \/ YOU SEND<\/div>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-335e6d7 e-con-full e-flex e-con e-child\" data-id=\"335e6d7\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-b8c0423 elementor-widget elementor-widget-text-editor\" data-id=\"b8c0423\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>3D model, industry, dimensions and what the part has to do. Drawings and requirements, where available.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-40eaacf e-con-full e-flex e-con e-child\" data-id=\"40eaacf\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t<div class=\"elementor-element elementor-element-e1d0300 e-con-full e-flex e-con e-child\" data-id=\"e1d0300\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-1c19299 e-con-full e-flex e-con e-child\" data-id=\"1c19299\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-2c4cebf elementor-widget elementor-widget-heading\" data-id=\"2c4cebf\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">02 \/ WE REVIEW<\/div>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-e895ca9 e-con-full e-flex e-con e-child\" data-id=\"e895ca9\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-b004540 elementor-widget elementor-widget-text-editor\" data-id=\"b004540\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>Dimensions, wall thicknesses, demouldability and load introduction. Anything we are missing, we ask about in the conversation.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-1d38760 e-con-full e-flex e-con e-child\" data-id=\"1d38760\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t<div class=\"elementor-element elementor-element-aad937e e-con-full e-flex e-con e-child\" data-id=\"aad937e\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-b5d34a3 e-con-full e-flex e-con e-child\" data-id=\"b5d34a3\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-fa9f203 elementor-widget elementor-widget-heading\" data-id=\"fa9f203\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<div class=\"elementor-heading-title elementor-size-default\">03 \/ YOU RECEIVE<\/div>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-274774a e-con-full e-flex e-con e-child\" data-id=\"274774a\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-04fde61 elementor-widget elementor-widget-text-editor\" data-id=\"04fde61\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>An assessment of feasibility with the open points named \u2013 and if it doesn\u2019t fit, a justification instead of a quotation.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-455b20c e-con-full e-flex e-con e-child\" data-id=\"455b20c\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-7e4d37f elementor-align-center elementor-mobile-align-center elementor-widget__width-initial elementor-widget elementor-widget-button\" data-id=\"7e4d37f\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"button.default\">\n\t\t\t\t\t\t\t\t\t\t<a class=\"elementor-button elementor-button-link elementor-size-sm\" href=\"\/en\/free-consulting\/\">\n\t\t\t\t\t\t<span class=\"elementor-button-content-wrapper\">\n\t\t\t\t\t\t<span class=\"elementor-button-icon\">\n\t\t\t\t<svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" xmlns:xlink=\"http:\/\/www.w3.org\/1999\/xlink\" width=\"20\" height=\"20\" viewBox=\"0 0 20 20\" fill=\"none\"><rect width=\"20\" height=\"20\" fill=\"url(#pattern0_1194_5)\"><\/rect><defs><pattern id=\"pattern0_1194_5\" patternContentUnits=\"objectBoundingBox\" width=\"1\" height=\"1\"><use xlink:href=\"#image0_1194_5\" transform=\"scale(0.05)\"><\/use><\/pattern><image id=\"image0_1194_5\" width=\"20\" height=\"20\" preserveAspectRatio=\"none\" xlink:href=\"data:image\/png;base64,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\"><\/image><\/defs><\/svg>\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"elementor-button-text\">Free consultation<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-d22fef7 elementor-align-center elementor-mobile-align-center elementor-widget__width-initial elementor-widget elementor-widget-button\" data-id=\"d22fef7\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"button.default\">\n\t\t\t\t\t\t\t\t\t\t<a class=\"elementor-button elementor-button-link elementor-size-sm\" href=\"\/en\/contact-us\/\">\n\t\t\t\t\t\t<span class=\"elementor-button-content-wrapper\">\n\t\t\t\t\t\t<span class=\"elementor-button-icon\">\n\t\t\t\t<svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" xmlns:xlink=\"http:\/\/www.w3.org\/1999\/xlink\" width=\"20\" height=\"20\" viewBox=\"0 0 20 20\" fill=\"none\"><rect width=\"20\" height=\"20\" fill=\"url(#pattern0_1194_5)\"><\/rect><defs><pattern id=\"pattern0_1194_5\" patternContentUnits=\"objectBoundingBox\" width=\"1\" height=\"1\"><use xlink:href=\"#image0_1194_5\" transform=\"scale(0.05)\"><\/use><\/pattern><image id=\"image0_1194_5\" width=\"20\" height=\"20\" preserveAspectRatio=\"none\" xlink:href=\"data:image\/png;base64,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\"><\/image><\/defs><\/svg>\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"elementor-button-text\">Contact us now<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-0199d5a elementor-widget elementor-widget-text-editor\" data-id=\"0199d5a\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>or directly to Sebastian Preiss, Head of Engineering<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-2d53a21 e-con-full e-flex e-con e-child\" data-id=\"2d53a21\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-44b4475 e-con-full e-flex e-con e-child\" data-id=\"44b4475\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-0193b60 elementor-widget elementor-widget-heading\" data-id=\"0193b60\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<h2 class=\"elementor-heading-title elementor-size-default\">Frequently asked questions about feasibility<\/h2>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-123334e e-con-full e-flex e-con e-child\" data-id=\"123334e\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-90647ab elementor-widget__width-inherit elementor-widget elementor-widget-n-accordion\" data-id=\"90647ab\" data-element_type=\"widget\" data-e-type=\"widget\" data-settings=\"{&quot;default_state&quot;:&quot;expanded&quot;,&quot;max_items_expended&quot;:&quot;one&quot;,&quot;n_accordion_animation_duration&quot;:{&quot;unit&quot;:&quot;ms&quot;,&quot;size&quot;:400,&quot;sizes&quot;:[]}}\" data-widget_type=\"nested-accordion.default\">\n\t\t\t\t\t\t\t<div class=\"e-n-accordion\" aria-label=\"Accordion. Open links with Enter or Space, close with Escape, and navigate with Arrow Keys\">\n\t\t\t\t\t\t<details id=\"e-n-accordion-item-1510\" class=\"e-n-accordion-item\" open>\n\t\t\t\t<summary class=\"e-n-accordion-item-title\" data-accordion-index=\"1\" tabindex=\"0\" aria-expanded=\"true\" aria-controls=\"e-n-accordion-item-1510\" >\n\t\t\t\t\t<span class='e-n-accordion-item-title-header'><h3 class=\"e-n-accordion-item-title-text\"> How large can my part be? <\/h3><\/span>\n\t\t\t\t\t\t\t<span class='e-n-accordion-item-title-icon'>\n\t\t\t<span class='e-opened' ><svg aria-hidden=\"true\" class=\"e-font-icon-svg e-fas-arrow-circle-up\" viewBox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M8 256C8 119 119 8 256 8s248 111 248 248-111 248-248 248S8 393 8 256zm143.6 28.9l72.4-75.5V392c0 13.3 10.7 24 24 24h16c13.3 0 24-10.7 24-24V209.4l72.4 75.5c9.3 9.7 24.8 9.9 34.3.4l10.9-11c9.4-9.4 9.4-24.6 0-33.9L273 107.7c-9.4-9.4-24.6-9.4-33.9 0L106.3 240.4c-9.4 9.4-9.4 24.6 0 33.9l10.9 11c9.6 9.5 25.1 9.3 34.4-.4z\"><\/path><\/svg><\/span>\n\t\t\t<span class='e-closed'><svg aria-hidden=\"true\" class=\"e-font-icon-svg e-fas-arrow-circle-down\" viewBox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M504 256c0 137-111 248-248 248S8 393 8 256 119 8 256 8s248 111 248 248zm-143.6-28.9L288 302.6V120c0-13.3-10.7-24-24-24h-16c-13.3 0-24 10.7-24 24v182.6l-72.4-75.5c-9.3-9.7-24.8-9.9-34.3-.4l-10.9 11c-9.4 9.4-9.4 24.6 0 33.9L239 404.3c9.4 9.4 24.6 9.4 33.9 0l132.7-132.7c9.4-9.4 9.4-24.6 0-33.9l-10.9-11c-9.5-9.5-25-9.3-34.3.4z\"><\/path><\/svg><\/span>\n\t\t<\/span>\n\n\t\t\t\t\t\t<\/summary>\n\t\t\t\t<div role=\"region\" aria-labelledby=\"e-n-accordion-item-1510\" class=\"elementor-element elementor-element-4bc8942 e-con-full e-flex e-con e-child\" data-id=\"4bc8942\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-0848098 elementor-widget elementor-widget-text-editor\" data-id=\"0848098\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>A single component up to 1.5 \u00d7 4 m \u2013 this limit comes from the autoclave chamber. Assemblies can be larger; the limit is then transport out of the hall.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/details>\n\t\t\t\t\t\t<details id=\"e-n-accordion-item-1511\" class=\"e-n-accordion-item\" >\n\t\t\t\t<summary class=\"e-n-accordion-item-title\" data-accordion-index=\"2\" tabindex=\"-1\" aria-expanded=\"false\" aria-controls=\"e-n-accordion-item-1511\" >\n\t\t\t\t\t<span class='e-n-accordion-item-title-header'><h3 class=\"e-n-accordion-item-title-text\"> Can you mould ribs directly onto a shell? <\/h3><\/span>\n\t\t\t\t\t\t\t<span class='e-n-accordion-item-title-icon'>\n\t\t\t<span class='e-opened' ><svg aria-hidden=\"true\" class=\"e-font-icon-svg e-fas-arrow-circle-up\" viewBox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M8 256C8 119 119 8 256 8s248 111 248 248-111 248-248 248S8 393 8 256zm143.6 28.9l72.4-75.5V392c0 13.3 10.7 24 24 24h16c13.3 0 24-10.7 24-24V209.4l72.4 75.5c9.3 9.7 24.8 9.9 34.3.4l10.9-11c9.4-9.4 9.4-24.6 0-33.9L273 107.7c-9.4-9.4-24.6-9.4-33.9 0L106.3 240.4c-9.4 9.4-9.4 24.6 0 33.9l10.9 11c9.6 9.5 25.1 9.3 34.4-.4z\"><\/path><\/svg><\/span>\n\t\t\t<span class='e-closed'><svg aria-hidden=\"true\" class=\"e-font-icon-svg e-fas-arrow-circle-down\" viewBox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M504 256c0 137-111 248-248 248S8 393 8 256 119 8 256 8s248 111 248 248zm-143.6-28.9L288 302.6V120c0-13.3-10.7-24-24-24h-16c-13.3 0-24 10.7-24 24v182.6l-72.4-75.5c-9.3-9.7-24.8-9.9-34.3-.4l-10.9 11c-9.4 9.4-9.4 24.6 0 33.9L239 404.3c9.4 9.4 24.6 9.4 33.9 0l132.7-132.7c9.4-9.4 9.4-24.6 0-33.9l-10.9-11c-9.5-9.5-25-9.3-34.3.4z\"><\/path><\/svg><\/span>\n\t\t<\/span>\n\n\t\t\t\t\t\t<\/summary>\n\t\t\t\t<div role=\"region\" aria-labelledby=\"e-n-accordion-item-1511\" class=\"elementor-element elementor-element-97e0119 e-con-full e-flex e-con e-child\" data-id=\"97e0119\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-997713f elementor-widget elementor-widget-text-editor\" data-id=\"997713f\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>Not in the prepreg autoclave process. Ribs are made as separate parts and then joined \u2013 differential construction.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/details>\n\t\t\t\t\t\t<details id=\"e-n-accordion-item-1512\" class=\"e-n-accordion-item\" >\n\t\t\t\t<summary class=\"e-n-accordion-item-title\" data-accordion-index=\"3\" tabindex=\"-1\" aria-expanded=\"false\" aria-controls=\"e-n-accordion-item-1512\" >\n\t\t\t\t\t<span class='e-n-accordion-item-title-header'><h3 class=\"e-n-accordion-item-title-text\"> What tolerance do you achieve? <\/h3><\/span>\n\t\t\t\t\t\t\t<span class='e-n-accordion-item-title-icon'>\n\t\t\t<span class='e-opened' ><svg aria-hidden=\"true\" class=\"e-font-icon-svg e-fas-arrow-circle-up\" viewBox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M8 256C8 119 119 8 256 8s248 111 248 248-111 248-248 248S8 393 8 256zm143.6 28.9l72.4-75.5V392c0 13.3 10.7 24 24 24h16c13.3 0 24-10.7 24-24V209.4l72.4 75.5c9.3 9.7 24.8 9.9 34.3.4l10.9-11c9.4-9.4 9.4-24.6 0-33.9L273 107.7c-9.4-9.4-24.6-9.4-33.9 0L106.3 240.4c-9.4 9.4-9.4 24.6 0 33.9l10.9 11c9.6 9.5 25.1 9.3 34.4-.4z\"><\/path><\/svg><\/span>\n\t\t\t<span class='e-closed'><svg aria-hidden=\"true\" class=\"e-font-icon-svg e-fas-arrow-circle-down\" viewBox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M504 256c0 137-111 248-248 248S8 393 8 256 119 8 256 8s248 111 248 248zm-143.6-28.9L288 302.6V120c0-13.3-10.7-24-24-24h-16c-13.3 0-24 10.7-24 24v182.6l-72.4-75.5c-9.3-9.7-24.8-9.9-34.3-.4l-10.9 11c-9.4 9.4-9.4 24.6 0 33.9L239 404.3c9.4 9.4 24.6 9.4 33.9 0l132.7-132.7c9.4-9.4 9.4-24.6 0-33.9l-10.9-11c-9.5-9.5-25-9.3-34.3.4z\"><\/path><\/svg><\/span>\n\t\t<\/span>\n\n\t\t\t\t\t\t<\/summary>\n\t\t\t\t<div role=\"region\" aria-labelledby=\"e-n-accordion-item-1512\" class=\"elementor-element elementor-element-cbb9930 e-con-full e-flex e-con e-child\" data-id=\"cbb9930\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-7ca3a04 elementor-widget elementor-widget-text-editor\" data-id=\"7ca3a04\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>Typically 0.1 to 0.5 mm, depending on size, complexity and mould. With CNC rework, a few hundredths are possible.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/details>\n\t\t\t\t\t\t<details id=\"e-n-accordion-item-1513\" class=\"e-n-accordion-item\" >\n\t\t\t\t<summary class=\"e-n-accordion-item-title\" data-accordion-index=\"4\" tabindex=\"-1\" aria-expanded=\"false\" aria-controls=\"e-n-accordion-item-1513\" >\n\t\t\t\t\t<span class='e-n-accordion-item-title-header'><h3 class=\"e-n-accordion-item-title-text\"> Do you carry out ultrasonic or CT testing? <\/h3><\/span>\n\t\t\t\t\t\t\t<span class='e-n-accordion-item-title-icon'>\n\t\t\t<span class='e-opened' ><svg aria-hidden=\"true\" class=\"e-font-icon-svg e-fas-arrow-circle-up\" viewBox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M8 256C8 119 119 8 256 8s248 111 248 248-111 248-248 248S8 393 8 256zm143.6 28.9l72.4-75.5V392c0 13.3 10.7 24 24 24h16c13.3 0 24-10.7 24-24V209.4l72.4 75.5c9.3 9.7 24.8 9.9 34.3.4l10.9-11c9.4-9.4 9.4-24.6 0-33.9L273 107.7c-9.4-9.4-24.6-9.4-33.9 0L106.3 240.4c-9.4 9.4-9.4 24.6 0 33.9l10.9 11c9.6 9.5 25.1 9.3 34.4-.4z\"><\/path><\/svg><\/span>\n\t\t\t<span class='e-closed'><svg aria-hidden=\"true\" class=\"e-font-icon-svg e-fas-arrow-circle-down\" viewBox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M504 256c0 137-111 248-248 248S8 393 8 256 119 8 256 8s248 111 248 248zm-143.6-28.9L288 302.6V120c0-13.3-10.7-24-24-24h-16c-13.3 0-24 10.7-24 24v182.6l-72.4-75.5c-9.3-9.7-24.8-9.9-34.3-.4l-10.9 11c-9.4 9.4-9.4 24.6 0 33.9L239 404.3c9.4 9.4 24.6 9.4 33.9 0l132.7-132.7c9.4-9.4 9.4-24.6 0-33.9l-10.9-11c-9.5-9.5-25-9.3-34.3.4z\"><\/path><\/svg><\/span>\n\t\t<\/span>\n\n\t\t\t\t\t\t<\/summary>\n\t\t\t\t<div role=\"region\" aria-labelledby=\"e-n-accordion-item-1513\" class=\"elementor-element elementor-element-36f8349 e-con-full e-flex e-con e-child\" data-id=\"36f8349\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-9a490ff elementor-widget elementor-widget-text-editor\" data-id=\"9a490ff\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>Not in-house. We work with a partner network for this.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/details>\n\t\t\t\t\t\t<details id=\"e-n-accordion-item-1514\" class=\"e-n-accordion-item\" >\n\t\t\t\t<summary class=\"e-n-accordion-item-title\" data-accordion-index=\"5\" tabindex=\"-1\" aria-expanded=\"false\" aria-controls=\"e-n-accordion-item-1514\" >\n\t\t\t\t\t<span class='e-n-accordion-item-title-header'><h3 class=\"e-n-accordion-item-title-text\"> Can a CFRP part be milled from solid? <\/h3><\/span>\n\t\t\t\t\t\t\t<span class='e-n-accordion-item-title-icon'>\n\t\t\t<span class='e-opened' ><svg aria-hidden=\"true\" class=\"e-font-icon-svg e-fas-arrow-circle-up\" viewBox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M8 256C8 119 119 8 256 8s248 111 248 248-111 248-248 248S8 393 8 256zm143.6 28.9l72.4-75.5V392c0 13.3 10.7 24 24 24h16c13.3 0 24-10.7 24-24V209.4l72.4 75.5c9.3 9.7 24.8 9.9 34.3.4l10.9-11c9.4-9.4 9.4-24.6 0-33.9L273 107.7c-9.4-9.4-24.6-9.4-33.9 0L106.3 240.4c-9.4 9.4-9.4 24.6 0 33.9l10.9 11c9.6 9.5 25.1 9.3 34.4-.4z\"><\/path><\/svg><\/span>\n\t\t\t<span class='e-closed'><svg aria-hidden=\"true\" class=\"e-font-icon-svg e-fas-arrow-circle-down\" viewBox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M504 256c0 137-111 248-248 248S8 393 8 256 119 8 256 8s248 111 248 248zm-143.6-28.9L288 302.6V120c0-13.3-10.7-24-24-24h-16c-13.3 0-24 10.7-24 24v182.6l-72.4-75.5c-9.3-9.7-24.8-9.9-34.3-.4l-10.9 11c-9.4 9.4-9.4 24.6 0 33.9L239 404.3c9.4 9.4 24.6 9.4 33.9 0l132.7-132.7c9.4-9.4 9.4-24.6 0-33.9l-10.9-11c-9.5-9.5-25-9.3-34.3.4z\"><\/path><\/svg><\/span>\n\t\t<\/span>\n\n\t\t\t\t\t\t<\/summary>\n\t\t\t\t<div role=\"region\" aria-labelledby=\"e-n-accordion-item-1514\" class=\"elementor-element elementor-element-abe7bad e-con-full e-flex e-con e-child\" data-id=\"abe7bad\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-e988f9f elementor-widget elementor-widget-text-editor\" data-id=\"e988f9f\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>Technically yes, sensibly no. More than 90 % of the fibres are cut, and the part loses its reinforcement.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/details>\n\t\t\t\t\t\t<details id=\"e-n-accordion-item-1515\" class=\"e-n-accordion-item\" >\n\t\t\t\t<summary class=\"e-n-accordion-item-title\" data-accordion-index=\"6\" tabindex=\"-1\" aria-expanded=\"false\" aria-controls=\"e-n-accordion-item-1515\" >\n\t\t\t\t\t<span class='e-n-accordion-item-title-header'><h3 class=\"e-n-accordion-item-title-text\"> What do you need for an initial assessment? <\/h3><\/span>\n\t\t\t\t\t\t\t<span class='e-n-accordion-item-title-icon'>\n\t\t\t<span class='e-opened' ><svg aria-hidden=\"true\" class=\"e-font-icon-svg e-fas-arrow-circle-up\" viewBox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M8 256C8 119 119 8 256 8s248 111 248 248-111 248-248 248S8 393 8 256zm143.6 28.9l72.4-75.5V392c0 13.3 10.7 24 24 24h16c13.3 0 24-10.7 24-24V209.4l72.4 75.5c9.3 9.7 24.8 9.9 34.3.4l10.9-11c9.4-9.4 9.4-24.6 0-33.9L273 107.7c-9.4-9.4-24.6-9.4-33.9 0L106.3 240.4c-9.4 9.4-9.4 24.6 0 33.9l10.9 11c9.6 9.5 25.1 9.3 34.4-.4z\"><\/path><\/svg><\/span>\n\t\t\t<span class='e-closed'><svg aria-hidden=\"true\" class=\"e-font-icon-svg e-fas-arrow-circle-down\" viewBox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M504 256c0 137-111 248-248 248S8 393 8 256 119 8 256 8s248 111 248 248zm-143.6-28.9L288 302.6V120c0-13.3-10.7-24-24-24h-16c-13.3 0-24 10.7-24 24v182.6l-72.4-75.5c-9.3-9.7-24.8-9.9-34.3-.4l-10.9 11c-9.4 9.4-9.4 24.6 0 33.9L239 404.3c9.4 9.4 24.6 9.4 33.9 0l132.7-132.7c9.4-9.4 9.4-24.6 0-33.9l-10.9-11c-9.5-9.5-25-9.3-34.3.4z\"><\/path><\/svg><\/span>\n\t\t<\/span>\n\n\t\t\t\t\t\t<\/summary>\n\t\t\t\t<div role=\"region\" aria-labelledby=\"e-n-accordion-item-1515\" class=\"elementor-element elementor-element-911f020 e-con-full e-flex e-con e-child\" data-id=\"911f020\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-ab4c467 elementor-widget elementor-widget-text-editor\" data-id=\"ab4c467\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>Industry, dimensions, requirements \u2013 and a 3D model.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/details>\n\t\t\t\t\t\t<details id=\"e-n-accordion-item-1516\" class=\"e-n-accordion-item\" >\n\t\t\t\t<summary class=\"e-n-accordion-item-title\" data-accordion-index=\"7\" tabindex=\"-1\" aria-expanded=\"false\" aria-controls=\"e-n-accordion-item-1516\" >\n\t\t\t\t\t<span class='e-n-accordion-item-title-header'><h3 class=\"e-n-accordion-item-title-text\"> Does all this also apply to wound products? <\/h3><\/span>\n\t\t\t\t\t\t\t<span class='e-n-accordion-item-title-icon'>\n\t\t\t<span class='e-opened' ><svg aria-hidden=\"true\" class=\"e-font-icon-svg e-fas-arrow-circle-up\" viewBox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M8 256C8 119 119 8 256 8s248 111 248 248-111 248-248 248S8 393 8 256zm143.6 28.9l72.4-75.5V392c0 13.3 10.7 24 24 24h16c13.3 0 24-10.7 24-24V209.4l72.4 75.5c9.3 9.7 24.8 9.9 34.3.4l10.9-11c9.4-9.4 9.4-24.6 0-33.9L273 107.7c-9.4-9.4-24.6-9.4-33.9 0L106.3 240.4c-9.4 9.4-9.4 24.6 0 33.9l10.9 11c9.6 9.5 25.1 9.3 34.4-.4z\"><\/path><\/svg><\/span>\n\t\t\t<span class='e-closed'><svg aria-hidden=\"true\" class=\"e-font-icon-svg e-fas-arrow-circle-down\" viewBox=\"0 0 512 512\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"><path d=\"M504 256c0 137-111 248-248 248S8 393 8 256 119 8 256 8s248 111 248 248zm-143.6-28.9L288 302.6V120c0-13.3-10.7-24-24-24h-16c-13.3 0-24 10.7-24 24v182.6l-72.4-75.5c-9.3-9.7-24.8-9.9-34.3-.4l-10.9 11c-9.4 9.4-9.4 24.6 0 33.9L239 404.3c9.4 9.4 24.6 9.4 33.9 0l132.7-132.7c9.4-9.4 9.4-24.6 0-33.9l-10.9-11c-9.5-9.5-25-9.3-34.3.4z\"><\/path><\/svg><\/span>\n\t\t<\/span>\n\n\t\t\t\t\t\t<\/summary>\n\t\t\t\t<div role=\"region\" aria-labelledby=\"e-n-accordion-item-1516\" class=\"elementor-element elementor-element-16dcd84 e-con-full e-flex e-con e-child\" data-id=\"16dcd84\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-254e2aa elementor-widget elementor-widget-text-editor\" data-id=\"254e2aa\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>No. Different accuracies and different quantities apply there.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/details>\n\t\t\t\t\t<\/div>\n\t\t\t\t\t<script type=\"application\/ld+json\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"How large can my part be?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"A single component up to 1.5 \\u00d7 4 m \\u2013 this limit comes from the autoclave chamber. Assemblies can be larger; the limit is then transport out of the hall.\"}},{\"@type\":\"Question\",\"name\":\"Can you mould ribs directly onto a shell?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Not in the prepreg autoclave process. Ribs are made as separate parts and then joined \\u2013 differential construction.\"}},{\"@type\":\"Question\",\"name\":\"What tolerance do you achieve?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Typically 0.1 to 0.5 mm, depending on size, complexity and mould. With CNC rework, a few hundredths are possible.\"}},{\"@type\":\"Question\",\"name\":\"Do you carry out ultrasonic or CT testing?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Not in-house. We work with a partner network for this.\"}},{\"@type\":\"Question\",\"name\":\"Can a CFRP part be milled from solid?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Technically yes, sensibly no. More than 90 % of the fibres are cut, and the part loses its reinforcement.\"}},{\"@type\":\"Question\",\"name\":\"What do you need for an initial assessment?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Industry, dimensions, requirements \\u2013 and a 3D model.\"}},{\"@type\":\"Question\",\"name\":\"Does all this also apply to wound products?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. Different accuracies and different quantities apply there.\"}}]}<\/script>\n\t\t\t\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-c5b3b2c e-con-full e-flex e-con e-child\" data-id=\"c5b3b2c\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t\t<div class=\"elementor-element elementor-element-e8e04f8 elementor-widget elementor-widget-heading\" data-id=\"e8e04f8\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<span class=\"elementor-heading-title elementor-size-default\">TERMS ON THIS PAGE<\/span>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-03f332b e-con-full e-flex e-con e-child\" data-id=\"03f332b\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-60f40eb elementor-widget__width-initial elementor-widget elementor-widget-text-editor\" data-id=\"60f40eb\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p><b>Prepreg<\/b> \u2014 Fibre fabric pre-impregnated with resin that cures under pressure and temperature.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-bf440db elementor-widget__width-initial elementor-widget elementor-widget-text-editor\" data-id=\"bf440db\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p><b>Autoclave<\/b> \u2014 Pressure vessel in which the laminate cures under overpressure and temperature.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-fd2733d elementor-widget__width-initial elementor-widget elementor-widget-text-editor\" data-id=\"fd2733d\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p><b>Differential construction<\/b> \u2014 Ribs and stiffeners are made as separate parts and joined.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-5704593 elementor-widget__width-initial elementor-widget elementor-widget-text-editor\" data-id=\"5704593\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p><b>Exotherm<\/b> \u2014 Heat that the resin itself releases during curing.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-2e6d8b1 elementor-widget__width-initial elementor-widget elementor-widget-text-editor\" data-id=\"2e6d8b1\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p><b>Undercut<\/b> \u2014 Geometry that prevents demoulding in one direction.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-b8e2c76 elementor-widget__width-initial elementor-widget elementor-widget-text-editor\" data-id=\"b8e2c76\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p><b>Anisotropic<\/b> \u2014 Direction-dependent. A laminate behaves differently along the fibre than across it.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-541b787 elementor-widget__width-initial elementor-widget elementor-widget-text-editor\" data-id=\"541b787\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p><b>Ra<\/b> \u2014 Arithmetic mean roughness, a measure of surface roughness.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-47ed7cd elementor-widget__width-initial elementor-widget elementor-widget-text-editor\" data-id=\"47ed7cd\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p><b>Non-destructive testing<\/b> \u2014 Test methods without damage, such as ultrasound, X-ray or CT.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-83e76d3 e-con-full e-flex e-con e-child\" data-id=\"83e76d3\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-a9629e9 e-con-full e-flex e-con e-child\" data-id=\"a9629e9\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-8540fde elementor-widget elementor-widget-heading\" data-id=\"8540fde\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<h2 class=\"elementor-heading-title elementor-size-default\">The question that almost always comes next<\/h2>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-242591b e-con-full e-flex e-con e-child\" data-id=\"242591b\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-8bc90b6 e-con-full e-flex e-con e-child\" data-id=\"8bc90b6\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t<div class=\"elementor-element elementor-element-edbbcb4 e-con-full elementor-hidden-desktop elementor-hidden-laptop elementor-hidden-tablet elementor-hidden-mobile e-flex e-con e-child\" data-id=\"edbbcb4\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-c60294f elementor-widget elementor-widget-heading\" data-id=\"c60294f\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<span class=\"elementor-heading-title elementor-size-default\">KNOWLEDGE<\/span>\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-8142758 elementor-widget elementor-widget-heading\" data-id=\"8142758\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<h3 class=\"elementor-heading-title elementor-size-default\">Prepreg, infusion or RTM: which process fits?<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-48d5c90 e-con-full elementor-hidden-desktop elementor-hidden-laptop elementor-hidden-tablet elementor-hidden-mobile e-flex e-con e-child\" data-id=\"48d5c90\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-886b302 elementor-widget elementor-widget-heading\" data-id=\"886b302\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<span class=\"elementor-heading-title elementor-size-default\">KNOWLEDGE<\/span>\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-c123cea elementor-widget elementor-widget-heading\" data-id=\"c123cea\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<h3 class=\"elementor-heading-title elementor-size-default\">When CFRP is not worth it<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<a class=\"elementor-element elementor-element-dc9f725 e-con-full e-flex e-con e-child\" data-id=\"dc9f725\" data-element_type=\"container\" data-e-type=\"container\" href=\"\/en\/competencies\/design-and-calculation\/\">\n\t\t\t\t<div class=\"elementor-element elementor-element-b24f25f elementor-widget elementor-widget-heading\" data-id=\"b24f25f\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<span class=\"elementor-heading-title elementor-size-default\">COMPETENCE<\/span>\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-be76759 elementor-widget elementor-widget-heading\" data-id=\"be76759\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<h3 class=\"elementor-heading-title elementor-size-default\">Design and calculation<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/a>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-da742ef e-con-full e-flex e-con e-child\" data-id=\"da742ef\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t<div class=\"elementor-element elementor-element-3b3fa8c e-con-full e-flex e-con e-child\" data-id=\"3b3fa8c\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-d9da37d elementor-widget elementor-widget-heading\" data-id=\"d9da37d\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<h2 class=\"elementor-heading-title elementor-size-default\">Send us your 3D model and three details<\/h2>\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-09d56b8 e-con-full e-flex e-con e-child\" data-id=\"09d56b8\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;gradient&quot;}\">\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-5aa3528 elementor-widget elementor-widget-text-editor\" data-id=\"5aa3528\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>Industry, dimensions, requirements. You will receive an initial feasibility assessment \u2013 without it having to turn into an enquiry.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-b4073c4 e-con-full e-flex e-con e-child\" data-id=\"b4073c4\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-e4c3541 elementor-align-center elementor-mobile-align-center elementor-widget__width-initial elementor-widget elementor-widget-button\" data-id=\"e4c3541\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"button.default\">\n\t\t\t\t\t\t\t\t\t\t<a class=\"elementor-button elementor-button-link elementor-size-sm\" href=\"\/en\/free-consulting\/\">\n\t\t\t\t\t\t<span class=\"elementor-button-content-wrapper\">\n\t\t\t\t\t\t<span class=\"elementor-button-icon\">\n\t\t\t\t<svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" xmlns:xlink=\"http:\/\/www.w3.org\/1999\/xlink\" width=\"20\" height=\"20\" viewBox=\"0 0 20 20\" fill=\"none\"><rect width=\"20\" height=\"20\" fill=\"url(#pattern0_1194_5)\"><\/rect><defs><pattern id=\"pattern0_1194_5\" patternContentUnits=\"objectBoundingBox\" width=\"1\" height=\"1\"><use xlink:href=\"#image0_1194_5\" transform=\"scale(0.05)\"><\/use><\/pattern><image id=\"image0_1194_5\" width=\"20\" height=\"20\" preserveAspectRatio=\"none\" xlink:href=\"data:image\/png;base64,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\"><\/image><\/defs><\/svg>\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"elementor-button-text\">Send model<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-13c7783 elementor-align-center elementor-mobile-align-center elementor-widget__width-initial elementor-widget elementor-widget-button\" data-id=\"13c7783\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"button.default\">\n\t\t\t\t\t\t\t\t\t\t<a class=\"elementor-button elementor-button-link elementor-size-sm\" href=\"\/en\/contact-us\/\">\n\t\t\t\t\t\t<span class=\"elementor-button-content-wrapper\">\n\t\t\t\t\t\t<span class=\"elementor-button-icon\">\n\t\t\t\t<svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" xmlns:xlink=\"http:\/\/www.w3.org\/1999\/xlink\" width=\"20\" height=\"20\" viewBox=\"0 0 20 20\" fill=\"none\"><rect width=\"20\" height=\"20\" fill=\"url(#pattern0_1194_5)\"><\/rect><defs><pattern id=\"pattern0_1194_5\" patternContentUnits=\"objectBoundingBox\" width=\"1\" height=\"1\"><use xlink:href=\"#image0_1194_5\" transform=\"scale(0.05)\"><\/use><\/pattern><image id=\"image0_1194_5\" width=\"20\" height=\"20\" preserveAspectRatio=\"none\" xlink:href=\"data:image\/png;base64,iVBORw0KGgoAAAANSUhEUgAAABQAAAAUCAYAAACNiR0NAAAACXBIWXMAAAsTAAALEwEAmpwYAAAAAXNSR0IArs4c6QAAAARnQU1BAACxjwv8YQUAAAFkSURBVHgBnZWxSsNQFIZ\/W6XFqhSx4uBQ0EUXs7u4uYgGOuliN0fBB7DiA9iM4iC4OFm7OAuOTsmuEkXBapFK28FG7PHcNtJabm9u+sFpw82fj5tDcgJIIKIk1y5XkculDra\/tg1dOGxyVSgYN1DMgTyFJ9dPlqPByffKsrKU937HdU+amN1CV5ZosOz1dJNq9oWGr9X3ZFTsjp1ZWRuiiUnE55bxeW2h6dURmzWgIM71FuGfDVVqeGIG01sn8MoP+LjaRwArQpgOSkViY5haOwTxcfX2TBVdEkIDmowbGXzzThWkIwjDEKHZqCsjQvgITWr2JUYXV1URRwgdBEC8q3Jhr\/WfWFAKn4TwRpX4qZZQOt\/BSGoeqcwRAij+TZZKvzfl5XidH+yCxnNNbueW2hNG+qZ8PTukyf\/JwwsWDc6BtAHiBIXHUnaV2pPH1RCJvpvQxReLcW93SVx\/TXwekrLrfgEz+dpm2a1QJAAAAABJRU5ErkJggg==\"><\/image><\/defs><\/svg>\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"elementor-button-text\">Contact us now<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-770adcf e-con-full e-flex e-con e-child\" data-id=\"770adcf\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;sticky&quot;:&quot;top&quot;,&quot;sticky_on&quot;:[&quot;desktop&quot;,&quot;laptop&quot;],&quot;sticky_offset&quot;:80,&quot;sticky_parent&quot;:&quot;yes&quot;,&quot;sticky_effects_offset&quot;:0,&quot;sticky_anchor_link_offset&quot;:0}\">\n\t\t<div class=\"elementor-element elementor-element-ae87ea8 e-con-full e-flex e-con e-child\" data-id=\"ae87ea8\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-8f23c07 elementor-widget elementor-widget-image\" data-id=\"8f23c07\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"image.default\">\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<img decoding=\"async\" width=\"800\" height=\"803\" src=\"https:\/\/www.connova.com\/wp-content\/uploads\/2026\/10\/Sebastian-Preiss-1020x1024.webp\" class=\"attachment-large size-large wp-image-8801\" alt=\"Sebastian Preiss, Head of Engineering of Connova AG\" srcset=\"https:\/\/www.connova.com\/wp-content\/uploads\/2026\/10\/Sebastian-Preiss-1020x1024.webp 1020w, https:\/\/www.connova.com\/wp-content\/uploads\/2026\/10\/Sebastian-Preiss-300x300.webp 300w, https:\/\/www.connova.com\/wp-content\/uploads\/2026\/10\/Sebastian-Preiss-150x150.webp 150w, https:\/\/www.connova.com\/wp-content\/uploads\/2026\/10\/Sebastian-Preiss-768x771.webp 768w, https:\/\/www.connova.com\/wp-content\/uploads\/2026\/10\/Sebastian-Preiss.webp 1162w\" sizes=\"(max-width: 800px) 100vw, 800px\" \/>\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-95d29cb e-con-full e-flex e-con e-child\" data-id=\"95d29cb\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-a2cd6ff elementor-widget elementor-widget-heading\" data-id=\"a2cd6ff\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<span class=\"elementor-heading-title elementor-size-default\">YOUR CONTACT<\/span>\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-66eaccb elementor-widget elementor-widget-heading\" data-id=\"66eaccb\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<h3 class=\"elementor-heading-title elementor-size-default\">Sebastian Preiss<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-c6c409a elementor-widget elementor-widget-heading\" data-id=\"c6c409a\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<span class=\"elementor-heading-title elementor-size-default\">Head of Engineering \u00b7 Connova AG<\/span>\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-c225b7e elementor-widget elementor-widget-text-editor\" data-id=\"c225b7e\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>Heads engineering and assesses whether and how a part can be made from composites.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-a5d54a8 e-con-full e-flex e-con e-child\" data-id=\"a5d54a8\" data-element_type=\"container\" data-e-type=\"container\">\n\t\t\t\t<div class=\"elementor-element elementor-element-b75cc61 elementor-align-center elementor-mobile-align-center elementor-widget__width-initial elementor-widget elementor-widget-button\" data-id=\"b75cc61\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"button.default\">\n\t\t\t\t\t\t\t\t\t\t<a class=\"elementor-button elementor-button-link elementor-size-sm\" href=\"\/en\/contact-us\/\">\n\t\t\t\t\t\t<span class=\"elementor-button-content-wrapper\">\n\t\t\t\t\t\t<span class=\"elementor-button-icon\">\n\t\t\t\t<svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" xmlns:xlink=\"http:\/\/www.w3.org\/1999\/xlink\" width=\"20\" height=\"20\" viewBox=\"0 0 20 20\" fill=\"none\"><rect width=\"20\" height=\"20\" fill=\"url(#pattern0_1194_5)\"><\/rect><defs><pattern id=\"pattern0_1194_5\" patternContentUnits=\"objectBoundingBox\" width=\"1\" height=\"1\"><use xlink:href=\"#image0_1194_5\" transform=\"scale(0.05)\"><\/use><\/pattern><image id=\"image0_1194_5\" width=\"20\" height=\"20\" preserveAspectRatio=\"none\" xlink:href=\"data:image\/png;base64,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\"><\/image><\/defs><\/svg>\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"elementor-button-text\">Contact us now<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-5cb5902 elementor-align-center elementor-mobile-align-center elementor-widget__width-initial elementor-widget elementor-widget-button\" data-id=\"5cb5902\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"button.default\">\n\t\t\t\t\t\t\t\t\t\t<a class=\"elementor-button elementor-button-link elementor-size-sm\" href=\"#beratung\">\n\t\t\t\t\t\t<span class=\"elementor-button-content-wrapper\">\n\t\t\t\t\t\t<span class=\"elementor-button-icon\">\n\t\t\t\t<svg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" xmlns:xlink=\"http:\/\/www.w3.org\/1999\/xlink\" width=\"20\" height=\"20\" viewBox=\"0 0 20 20\" fill=\"none\"><rect width=\"20\" height=\"20\" fill=\"url(#pattern0_1194_5)\"><\/rect><defs><pattern id=\"pattern0_1194_5\" patternContentUnits=\"objectBoundingBox\" width=\"1\" height=\"1\"><use xlink:href=\"#image0_1194_5\" transform=\"scale(0.05)\"><\/use><\/pattern><image id=\"image0_1194_5\" width=\"20\" height=\"20\" preserveAspectRatio=\"none\" xlink:href=\"data:image\/png;base64,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\"><\/image><\/defs><\/svg>\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t<span class=\"elementor-button-text\">Check feasibility<\/span>\n\t\t\t\t\t<\/span>\n\t\t\t\t\t<\/a>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-b208c6e elementor-widget elementor-widget-text-editor\" data-id=\"b208c6e\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p><a href=\"\/en\/about-us\/#ch\"><span style=\"text-decoration: underline;\">View profile<\/span><\/a><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t<div class=\"elementor-element elementor-element-072af94 e-con-full e-flex e-con e-child\" data-id=\"072af94\" data-element_type=\"container\" data-e-type=\"container\" data-settings=\"{&quot;background_background&quot;:&quot;classic&quot;}\">\n\t\t\t\t<div class=\"elementor-element elementor-element-1925b75 elementor-widget elementor-widget-heading\" data-id=\"1925b75\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"heading.default\">\n\t\t\t\t\t<span class=\"elementor-heading-title elementor-size-default\">FURTHER QUESTIONS<\/span>\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-922034f elementor-widget elementor-widget-text-editor\" data-id=\"922034f\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>What does a CFRP part cost?<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-94f4c9e elementor-widget elementor-widget-text-editor\" data-id=\"94f4c9e\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>How long until the first part?<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-80d9149 elementor-widget elementor-widget-text-editor\" data-id=\"80d9149\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p>From what quantity is series production worthwhile?<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<div class=\"elementor-element elementor-element-5115416 elementor-widget elementor-widget-text-editor\" data-id=\"5115416\" data-element_type=\"widget\" data-e-type=\"widget\" data-widget_type=\"text-editor.default\">\n\t\t\t\t\t\t\t\t\t<p><a href=\"\/en\/knowledge\/\">All questions at a glance<\/a><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"<p>WISSEN \u00b7 MACHBARKEIT Ist mein Bauteil aus CFK \/ Composites machbar? Kurz: Drei Dinge entscheiden das: Die Abmessungen, die Wandst\u00e4rke und die Komplexit\u00e4t der Fl\u00e4chen. Passt Ihr Bauteil als Einzelkomponente in 1,5 \u00d7 4 m, liegt die Wandst\u00e4rke zwischen 0,3 und 25 mm und kommt die Geometrie ohne angeformte Rippen aus, ist der gr\u00f6sste Teil [&hellip;]<\/p>\n","protected":false},"author":5,"featured_media":9812,"parent":9805,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"elementor_header_footer","meta":{"footnotes":""},"class_list":["post-9809","page","type-page","status-publish","has-post-thumbnail","hentry"],"_links":{"self":[{"href":"https:\/\/www.connova.com\/en\/wp-json\/wp\/v2\/pages\/9809","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.connova.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.connova.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.connova.com\/en\/wp-json\/wp\/v2\/users\/5"}],"replies":[{"embeddable":true,"href":"https:\/\/www.connova.com\/en\/wp-json\/wp\/v2\/comments?post=9809"}],"version-history":[{"count":1,"href":"https:\/\/www.connova.com\/en\/wp-json\/wp\/v2\/pages\/9809\/revisions"}],"predecessor-version":[{"id":9817,"href":"https:\/\/www.connova.com\/en\/wp-json\/wp\/v2\/pages\/9809\/revisions\/9817"}],"up":[{"embeddable":true,"href":"https:\/\/www.connova.com\/en\/wp-json\/wp\/v2\/pages\/9805"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.connova.com\/en\/wp-json\/wp\/v2\/media\/9812"}],"wp:attachment":[{"href":"https:\/\/www.connova.com\/en\/wp-json\/wp\/v2\/media?parent=9809"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}